Toutes les catégories

3 16 gaine thermorétractable

The 3/16 heat shrink tubing is ideal for keeping those electrical wires in place safely. It is essential to note that electrical wires are very important since it carries electricity for us in order to provide power which enables lots of the items we use each and every day; pillar lights, computers therefore your consumers even tickers you utilize. Now, If these wires are not kept intact, they become hazardous. Short circuits, fires or worst injury to humans can happen in the case of a shock. This is why the wires that are going to be subjected to this kind of environment must be protected using something robust, abuse and hot proof. Congratulations, you need some 3/16 heat shrink tubing.

3/16 heat shrink tubing has a trick up its sleeve-not only does it protect your cables, but unlike all other types of tubes in the world that expand when exposed to heat! The product is made of a robust polyolefin which is renowned for its flexibility and insulation capabilities. As long as you apply some heat to this tubing, it will shrink and seal around the wires. It prevents the water, dirt and dusty to enter into wires of cables that can damage them otherwise. The electrical leakage can be controlled largely by the feature too.

    3 16 Heat Shrink Tubing

    The tubing is available in a range of sizes and colors, so it can fit wires with different gauges as well be used for general applications. 3/16: The number read as "three sixteenth" signifies the diameter sizing in inches of that tubing, and is approximately 4.76 mm.setSelection This particular size is ideal for the small-to-medium wires like those that come in cars, boats and other automobiles. You can also use it for home projects such as repairing or extending lamp power cords, speakers and appliances.

    Heat shrink tubing is used in all our projects to wire wrap power, and the right product can even be sealed water tight if needed.To use 3/16 heat shrink tubing you will need a source of head (heat gun or lighter), scissors for cutting the lengths that needs sealing. You should start by cutting the piece of tubing to whatever length you need for your project. NOW,take the tubing over that wire - see to it, tubing covers this naked part of a plait. You can then gradually and uniformly apply heat to the tubing until it fits tightly around the wire. However, while heating up be conscious that you do not want to burn the tubing.

    Pourquoi choisir la gaine thermorétractable TUOYAN 3 16 ?

    Catégories de produits connexes

    Vous ne trouvez pas ce que vous cherchez ?
    Contactez nos conseillers pour plus de produits disponibles.

    Demande de soumission maintenant